OPTIONAL – Water Misty System
The Vianen Water Misty system reduces the risk of fire caused by sparks during the cooking process,
especially from charcoal grills. The Vianen Water Misty system can be applied to the Water Wash UV-C
system. A separate piping system for the required cold water is integrated into the hood.
The nozzles of the Water Misty system release a continuous fine mist spray of water during the cooking
process. This highly efficient method of filtration also changes the grease from its gaseous state to
condensed grease particles in the cold water mist.
The contaminated water containing the effluent is collected in the same dedicated channels and runs off
to the drainage system.
The Vianen Water Misty system operates on a constant cold water feed to generate the water mist.
To safeguard the operation of the system the first 3 – 4 m of the extract ductwork is watertight and a
moisture eliminator is mounted on top of the hood. The controls of the Water Misty system is integrated
into the hoods. The Water Misty system can be also equipped with a Water Recycling System reducing the
water usage of the system.
FECON ® UV GREASE EXTRACTION FILTER
The FECON ® UV filters are specially designed for Vianen UV-C hoods to remove grease particles from the
extract air in combination with the UV-C system. Vianen FECON ® UV filters are fitted with to prevent any
UV-C light escaping from the plenum to the cooking staff.
The interlocking semi-circular blades of the filter create multiple centrifugal forces as the air passes
through the filter which ensure efficiency rates of 98% by 8 micron are achieved. The non-clogging
nature of the baffle filters allow the grease to run off the filters into integral drainage channels within
the hood. Each filter features two integral handles to make removal and refitting of the filters an easy
operation.
The filters are slotted into place in the filter bank to prevent them falling out during high seas.
The FECON®UV filter has been tested and is certified as an effective flame barrier i.e. no flame
penetration through the filter in the event of a galley fire.
• Proven and certified fire barrier (DIN 4102 & TNO)
• Excellent levels of hygiene – NSF approved
• Solid and durable construction – stainless steel
• High efficiency rates of 98% by 8 micron
• Locked in to for the most demanding environments
• Easy maintenance in any commercial dish wash machine
Vianen FECON ® UV filters are constructed from stainless steel type 304 (DIN 1.4031 grit 320) 1.2 mm
thick. The 40 mm thick filter is constructed without rivets and is provided with two integrated handles for
ease of handling.
The top and bottom of the filter frame features slots providing a 10% free area which allows moisture
and grease to drain away. The FECON®UV filters are designed to fit in any commercial dishwashing for
cleaning.
INSTALLATION
Hanging brackets are fitted on top of the corners of the hood for easy installation.
V-LEL INTEGRATED LIGHT FITTINGS IP65
The hoods are fitted with V-LEL, which are specially designed for VIANEN hoods. The standard type is
220/230V – 50Hz.
Standard sizes : 1229 mm — 40 W
: 629 mm — 20 W
On request Vianen can deliver alternative light fittings to
suit customer requirements. Inbuilt emergency lights can
also be delivered upon request.

TVUVI ЗОНТ С ТЕХНОЛОГИЕЙ Air Supply ™

₸

Подробнее о модели